Victron RS Smart Solar 48V/6000VA/230V Off-Grid Solar Inverter

Victron Inverter RS 48/6000 230V Smart Solar - Off-Grid Solar Inverter

The RS 48/6000 Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a 4kW high voltage MPPT solar energy charger (80-450VDC). Thanks to the modern design with high frequency technology, this solar inverter has excellent efficiency, low no-load power, very quiet operation and a weight of only 11 Kg. The inverter is equipped with a monitor display to read battery, inverter and solar energy charger data. This data can also be read via Bluetooth with the VictronConnect App. The inverter also has a VE.Direct and a VE.Can port for communication with a GX remote control for system monitoring.

Victron Inverter RS 48/6000 230V Smart Solar is a 48V 6 kVA solar inverter with 450V/4000W PV input. The device is specifically intended for self-sufficient solar applications where AC power supply is required.

Combination of an inverter, bi-directional DC-DC converter and MPPT
The inverter produces a perfect sine wave, capable of powering high-power appliances. It is powered by a bi-directional DC-DC converter, which can either charge the battery when excess solar energy is available or convert the battery when it is needed.

Wide range MPPT supply voltage
80 – 450 VDC, with a 120 VDC PV start-up supply voltage.

Lightweight, efficient and quiet
Thanks to high frequency technology and a new design, this powerful inverter weighs only 11 kg. In addition, it has excellent efficiency, low emergency power and very quiet operation.

Screen and Bluetooth
The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed using a smartphone or other device with Bluetooth enabled. In addition, Bluetooth can be used to set up the system and change settings with VictronConnect.

VE.Can and VE.Direct port
Connects to a GX device for remote system monitoring, data logging and firmware updates.

Built-in PV isolator
Both parallel PV strings, connected to the MC4 plugs, can be safely isolated with the large built-in switch at the bottom of the device.

I/O connections
Programmable relay, temperature sensor and supply voltage sensor connections. The remote input can also be configured to accept the Victron miniBMS.

Download