Email: office@solarroenergy.com
Telephone: +40773.705.140
Address: No. 55 Muncii Street, Constanța
Description
The galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on.
The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.
The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.
Download
Data Sheet
Product title
Victron Galvanic Isolator VDI-64A GDI000064000
Wattage
Product vendor
Victron energy
Product type
simple
Related products settings
Complementary products
Width
Compositions
Style
Characteristics
Amperage
Voltage
Type
Target platform
As a replacement for
Device model
Manufacturing number
Made in
Protection
Warranty
Energy label
Capacity
Color characteristics
Lumen
Lifetime
Colour temperature
Chip
Dimmable
Color rendering CRI
Starting time
On/Off switching cycles
Bluetooth version
HDMI version
Number of cells
IP Value
PCB Board color
First connection (Input)
Second connection (Output)
Length characteristics
Pin outside diameter
Pin inside diameter
Pin length
Oversized
Length in mm
Height in mm
Width in mm
Special freight
Extra heavy
Search product boosts
